Просмотр видео

YouTube

Просмотр:







Комментарии к видео на YouTube:

------------------------------------------------------------------------------------------------------------------
aullik aullik 26.12.2018
But isnt it super easy to cut through the steel cable. at least this is what lpl has taught me.
         Bosnianbill Bosnianbill 31.12.2018->I was trying to point out ALL the weaknesses of this type of lock, simply to give you options. By far, the easiest way to get into these is by picking the combo using one of the techniques that I demonstrated. Sometimes, however, the wheels are damaged or someone has put crazy glue or epoxy on them, so physical attack is the only way in. That's why I pointed out the joints as the weak part of the design. Usually, the cable is the toughest part of the lock tho, so I usually only try cutting that as a last resort - and that is almost always on European-made locks.
         David L David L 26.12.2018->+John Larson Masterlock? I've got bread ties that offer more security.
         John Larson John Larson 26.12.2018->+aullik Yes, these & many other cables are very easy to cut through. I often cut these kinds of cables off trespasser's deer stands on my land with just a multi-tool. I found it easier using a few whacks with a cheap hatchet though. Especially if it's a Masterlock cable. ?
         aullik aullik 26.12.2018->+Aloof Ness That was more a reply to what he said at the end. Something along the lines of "attack the weak cast iron"
         Aloof Ness Aloof Ness 26.12.2018->As a locksmith, customers want me to figure out their combinations without damage.
------------------------------------------------------------------------------------------------------------------
Mr Naesme Mr Naesme 12.01.2019
That's the same lock we used to use on our garbage corral. Got stolen a dozen times before the company gave up lol
------------------------------------------------------------------------------------------------------------------
bastarddoggy bastarddoggy 01.01.2019
Don't give that steel cable so much credit. The wire cutters on the multi-tool I carry in my pocket can go through the steel cable with ease.
------------------------------------------------------------------------------------------------------------------
popded popded 31.12.2018
We had some padlocks with the same big wheel/comb setup, in a shop I used to work in, you could change the combination by slipping off the dials! Pretty much one of the worst products I have ever come across in my 10-year locksmith career
------------------------------------------------------------------------------------------------------------------
Marc Andre Servant Marc Andre Servant 31.12.2018
The local Walmart here in Canada sells similar locks, and my sister got one. There are false gates, but they are so shallow that they are useless. Also, ratcheting lineman&#39;s cable cutters are 50$, quiet, concealable, and as LockPickingLawyer showed, they can cut through <b>four</b> of those cheap locks *at the same time*.
------------------------------------------------------------------------------------------------------------------
Christina Ramirez Christina Ramirez 31.12.2018
Why would you show crooks how easy this is?
------------------------------------------------------------------------------------------------------------------
Ben Lee Ben Lee 29.12.2018
Was anyone else just waiting for Bill to bleed?
------------------------------------------------------------------------------------------------------------------
Soviet Russia Soviet Russia 29.12.2018
I can&#39;t defeat this squire combination lock: <a href="https://www.screwfix.com/p/squire-steel-all-weather-combination-padlock-48mm/39735">https://www.screwfix.com/p/squire-steel-all-weather-combination-padlock-48mm/39735</a> Anybody got ideas?
------------------------------------------------------------------------------------------------------------------
dj PeK dj PeK 28.12.2018
I taught myself this in the early 90&#39;s, in school i would run to the bike rack and switch everyone&#39;s chains around and watch them try and figure out what was going on. I eventually would switch the numbers around on people locks (say it was 1234 i would make it 4213). the dial combination locks on lockers weren&#39;t any better, you could use the same method as this for them or just shim it in less than a second
------------------------------------------------------------------------------------------------------------------
Spigot Spigot 28.12.2018
I remember doing this to my own bicycle locks as a kid, forgotten about that until now.
------------------------------------------------------------------------------------------------------------------
ariesmars29 ariesmars29 28.12.2018
You need to get yourself a pry bar. They work better than a flat head screw driver.
------------------------------------------------------------------------------------------------------------------
Rocketlockopener Rocketlockopener 28.12.2018
Good to see your process on how you get into these locks
------------------------------------------------------------------------------------------------------------------
paul clarke paul clarke 27.12.2018
hi i&#39;m having trouble raking a master M15 pad lock it&#39;s the south all kite i have i&#39;ve been trying for three four days now on and off can you give advice please
------------------------------------------------------------------------------------------------------------------
Daz The Man Daz The Man 27.12.2018
It&#39;s like watching a horror movie, I worry for your hands first the knife then the screwdriver ,oh I can&#39;t take it any more ?
------------------------------------------------------------------------------------------------------------------
Stan Dard Stan Dard 27.12.2018
Four figure permutation locks, generally don&#39;t take me any more than four minutes to crack just by going through the numbers 0000, 0001, 0002 etc. Not good under any circumstances. And yes, if you think about it, 9999 is probably the best number.
------------------------------------------------------------------------------------------------------------------
Stan Ervin Stan Ervin 27.12.2018
Got a video on a pushbutton keypad electronic door lock? Or one that opens by scanning a magnetic strip &quot;pass card&quot;? ?
------------------------------------------------------------------------------------------------------------------
TargaWheels TargaWheels 27.12.2018
The cable itself is weak. Somebody cut right through it one slice and stole my bike.
------------------------------------------------------------------------------------------------------------------
ibrahim faqai ibrahim faqai 27.12.2018
??
------------------------------------------------------------------------------------------------------------------
Daniel Britton Daniel Britton 27.12.2018
Lol, when I was at school everyone locked their bikes with combo locks..... I used the tension technique to remove locks and swap them to other bikes ???
------------------------------------------------------------------------------------------------------------------
Southampton Lock Picking Club Southampton Lock Picking Club 27.12.2018
As always Bill, a super video and warning to others, about using these low security cable locks sir ?? Much appreciate the share of this and, hope you had a fantastic Christmas with your friends and family mate - thanks again ????

Rambler's Top100 Рейтинг@Mail.ru Яндекс цитирования Яндекс.Метрика

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17