YouTube

Просмотр:

------------------------------------------------------------------------------------------------------------------
@DavidShepheard 14.12.2022
Reassembly! Yay!<br><br>I thought it was going to be harder, but that trick with the follower was very clever.<br><br>So, what would you do, if you had a core that just spat everything out and you had different springs and random driver pins? Can you swap over some of the driver pins or springs and still have the lock work? Or would the follower block a driver pin that was sticking out too much (and let you know you have a mistake)?
------------------------------------------------------------------------------------------------------------------
@yozarian86 12.07.2022
Old model that’s easier to open. Still better than anything Master lock has ever made.
------------------------------------------------------------------------------------------------------------------
@johngparker557 25.06.2021
Thank you for taking them apart and putting back together I like that thank you again keep up the good work bye-bye
------------------------------------------------------------------------------------------------------------------
@dustinirving-carpentier3218 14.12.2020
Really enjoyed the tear down and reassembled
------------------------------------------------------------------------------------------------------------------
@avinotion 09.09.2020
I thought you were going to take the springs out and put them back in.<br>Looks like the most frustrating part.
------------------------------------------------------------------------------------------------------------------
@benfairhall5331 29.05.2020
I can’t understand why everyone wanted to see the reassembly ? It’s the opposite of the disassembly ?
------------------------------------------------------------------------------------------------------------------
@danielroglich3309 08.04.2020
Great job picking brother as always. Been looking forward to seeing you open the Abus granite . Thanks for sharing this review with us!
------------------------------------------------------------------------------------------------------------------
@Leyton247 26.02.2020
I’ve watch literally hundreds of your videos on here and it still amazes me the ease you open these high security locks ?
------------------------------------------------------------------------------------------------------------------
@christianferrazgruner 22.02.2020
Really nice to see the reassembly as well. You should do that on all videos! Keep up the good work.
------------------------------------------------------------------------------------------------------------------
@garymitchell5899 15.11.2019
Anyone who suggested these locks are fake doesn&#39;t know what they&#39;re talking about. Apart from anything else, the monetary value just isn&#39;t worth it - we&#39;re not talking about Rolex watches.
------------------------------------------------------------------------------------------------------------------
@ryancrazy1 08.11.2019
<a href="https://www.youtube.com/watch?v=93yoR_aEhTM&amp;t=95">1:35</a> one says &quot;pat pend.&quot; the other says &quot;ges gesch.&quot; one made in germany and one made in the US? or maybe made for US market?
          @my3dviews 25.12.2019->Probably made for all English speaking countries, not just the U.S..
          @ryancrazy1 25.12.2019->@my3dviews well, yeah those too haha
          @mrschuyler 26.11.2020->gesetzlich geschutt = "legally protected"
------------------------------------------------------------------------------------------------------------------
@Walczyk 06.11.2019
your lockpicking tools are so high quality but your screwdrivers are so cheap XD
------------------------------------------------------------------------------------------------------------------
@firefly4f4 09.10.2019
That &quot;Check that the lock works before putting the screw in&quot; step is very important. I messed up a lock by putting the core in off axis, and now the retainer plate is blocking part of the keyway.
------------------------------------------------------------------------------------------------------------------
@ChoasChief 19.09.2019
I’d hate to be on the wrong side of the court room from you ?
------------------------------------------------------------------------------------------------------------------
@JasperJanssen 27.06.2019
Why would slot 5 have a standard driver?
------------------------------------------------------------------------------------------------------------------
@ianitor 28.05.2019
I noticed that the springs didn’t jump out. Usually you mention something like “seems like all the springs are the same” except when it is a challenge lock. If the springs are different do you have to put them back in the same spot for the key to work or does differing tensions just make the picking harder? <br><br>(I was one of those asking for a reassembly... funny that it took this long for YouTube to recommend this one.)
          @JasperJanssen 27.06.2019->Doesn’t matter for normal operation, no. Might change pick resistance, though.
          @ryancrazy1 08.11.2019->@JasperJanssen yeah, i think the stiffness of the springs is just to throw people off when picking... keys and pins should care how hard they are being pushed, as long as they are in the right spot. So i wouldn't think it would matter, unless of course extra stiffness would compliment another security measure such as security pins.


edit: I've never picked a lock with any more than raking so I really don't know what I'm talking about.
          @ziiofswe 21.11.2019->@ryancrazy1 I think varied spring stiffness is to prevent "bumping"...?
          @ryancrazy1 21.11.2019->@ziiofswe that makes sense to me.
------------------------------------------------------------------------------------------------------------------
@HugeRademaker 25.04.2019
Thank you for the reassembling on video!
------------------------------------------------------------------------------------------------------------------
@JosephDalrymple 10.07.2018
You sound sick in this one. Hope you&#39;re feeling well! Thanks for all the amazing uploads! You&#39;ve inspired me to start lock picking, and it&#39;s surprisingly much easier than I expected. I credit your incredibly well-spoken narration and tactics (such as high tension).
------------------------------------------------------------------------------------------------------------------
@bird718 21.04.2018
reassembly was very different from what i expected
------------------------------------------------------------------------------------------------------------------
@VicariousReality7 07.04.2018
<b>WOAH</b><br><br>This is the first video i have seen of you reassembling a lock.... watched like a hundred
          @Walczyk 06.11.2019->yeah i loved it